Novtek Tile Grout
with Microban Antimicrobial Protection and Water Repellent
NovTek Tile Grout is the most innovative and advance
joint-filler ever introduced in the Philippines. It is the
only tile grout with built- in anti microbial properties that
will ensure your grout will remain free from black mold,
fungus and mildew.
This product is suitablefor all joints and tile edges.
- Prevents tile cracks and bonding failure
- High Standing and Adhesive tensile strength
- Resistant to slip with long open time
- Lower labor cost and reduced installation time
- For interior and exterior tile installations
- Can hold tile sizes over 30cm x 30cm
FORM : Colored powder
COLOR : Gray & White
WATER/POWDER
RATIO : 500 mLof water for 2 kg
POTLIFE: 3-4hours
CURING TIME: 24hours for ligh traffic
CONSISTENCY : homogenous paste mortar
PACKAGING : 2 kg/bag
COVERAGE AREA: 1.5 m2
-4 m2@ 6mm width
THICKNESS: 3mm
VOC CONTENT : Very low odor
SHELFLIFE: 12 Months
SURFACE PREPARATION
Joints and tile edges must be clean and free from loose materials. Wet joints prior to the application of grout.
MIXING INSTRUCTIONS
Pour clean water into a plastic pail and add NovTek Tile Grout gradually. Mix thoroughly until creamy and pasty consistency is attained. Let stand for 15 minutes, and then mix again.
For a 2kg NovTek Tile Grout, add about 500 ml of water.
APPLICATION
• Using a rubber faced float or squeegee spread the mixed NovTek Tile Grout diagonally across the tile joints, working the grout paste deep into the tile joints.
• Remove excess grout using a wet sponge in the same diagonal strokes to avoid dislodging the
embedded grout.
• Grouted areas are open to normal traffic after at least 24 hours