Novtek Tile Adhesive
Premium
It is a ready-to-use thin bed mortar adhesive for bonding ceramic tiles, marbles, granite and natural stones to wall or floors on indoor or outdoor concrete surface. It is a cement bound system for wall or floor tiles.
This product is suitable for all types of concrete surfaces. .
- Prevents tile cracks and bonding failure
- High Standing and Adhesive tensile strength
- Resistant to slip with long open time
- Easy workability and longer pot life
- Lower labor cost and reduced installation time
- For interior and exterior tile installations
- Can hold tile sizes over 30cm x 30cm
- Conforms to European Standard EN 12004 Type C1
FORM : powder
COLOR : Gray & White
WATER/POWDER
RATIO : 5-7 Liters of water for 25 kg
OPEN TIME: 15minutes
CONSISTENCY : homogenous paste mortar
PACKAGING : 25 kg/bag
COVERAGE AREA: 1.5 square meters per 1 cm thickness
THICKNESS: maximum of 5 cm (Gradual Application)
SHELFLIFE: 12 Months
SURFACE PREPARATION
Surface must be fully cured, clean, dry and free from contaminants.
MIXING INSTRUCTIONS
• Pour 5-7 liters of clean water into a plastic pail and add one 25-kg bag of NovTek Tile Adhesives.
• Always put water first in the container before adding NovTek Tile Adhesive for proper preparation.
• Mix thoroughly until a trowelable consistency is attained.
• Let stand for about 10 – 15 minutes, and then re-mix again.
APPLICATION
• Using a special notched trowel (6mm x 6mm) spread over 1-2 square meter area at a time only.
• Lay down tiles and adjust accordingly. Use tile spacers to ensure the correct spacing of the tiles.
• Ensure that the spread adhesive is used in 15-20 minutes maximum.
• Regularly check adhesive bed to ensure that no film layer has formed on the surface. If so disregard,
mix and spread a new batch straight from the mixing pail.
More Services
Brochures
Contact Us
marketing@novtek.ph
E-mail Address
(02) 8938-8592
Hot Line
Mon - Sat 8:00AM-5:00PM
Opening Time