Novtek 2K Skim Coat


A special bonding paste, based on aqueous high grade acrylic polymer designed to be mixed with Portland cement and applied on concrete surfaces for both interior and exterior to smoother surface
imperfections prior to painting.

This product in suitable for smoothing wall imperfections before painting in both exterior and interior applications

FORM : Liquid paste
COLOR : White
CONSISTENCY : Homogenous paste
CURING TIME : 7 days prior to painting purposes

COVERAGE AREA: 30 sqm. Per pail
RATIO: 1 part 2k : 1 part Portland Cement
POT LIFE: 30 minutes
SHELFLIFE: 12 Months
COMPRESSIVE STRENGTH: 3200psi (28 days)
TENSILE STRENGTH: 300 psi (28 days)


For maximum performance, substrate must be dry and in condition, free from loose dirt, dust, oil,
grease and other foreign matter before pre moistening.


Pour 1 part of Novtek 2K Skimcoat into a clean bucket then add slowly 1 part by weight of Gray
Portland cement .Mix thoroughly with a mechanical mixer until a totally lump free paste is obtained.


• Apply mixture on a pre moisten concrete using a clean , 24-inch-wide steel trowel to a desired thickness range of 1 mm to 3 mm.
• Let it dry for at least 20-30 minutes before applying the second coat.
• Allow 30 minutes surface drying before sanding to further smoothens the surface.
• Sand the uneven surface using 120 to 220 sandpaper and feather the edges into the surrounding
• No need to neutralize the surface
• Lightly brush off the dust from the surface and wipe gently with a damp cloth or sponge before priming and painting.
• Use primer when applying gloss or semi gloss latex topcoat. NO FURTHER ADDITION OF WATER TO