Acrylic Mortar Admixture
Additive for cementitious adhesives
Novcrete Acrylic Mortar Admixture is a premium grade acrylic polymer formulated to give excellent adhesion for new to old plaster as well as improve mechanical strength and elasticity of fresh concrete; recommended as well to increase further adhesive strength of tile adhesives, tile grouts, and mortar products
This product can be used as an Acrylic additive for ceramic tile adhesive, tile grout & other mortars. It also increases the adhesive strength & water resistance of concrete
- Increase adhesive strength
- Increase water resistant
- Ready to use
- For use with tile adhesives or tile grouts, mix one part Novcrete Acrylic Mortar Admixture with one part clean water.
- Use this as direct replacement for the water requirement in tile adhesive or tile grout mix; also applicable for tile-over-tile installations.
- Do not let the mixture for a long period time
TYPE : Acrylic Based Emulsion
COLOR : White
FORM : Glue-like
PACKAGING : 4 kg/gal
VOC CONTENT : characteristics
SHELF LIFE : 12 Months
SURFACE PREPARATION
Concrete must be clean thoroughly by removing all loosely adhering particles, dirt, oils, paints and other contaminants
MIXING INSTRUCTION
For preparation of bonding slurry (mixture of adhesive and cement), mix equal parts of NovCrete
Acrylic Mortar Admixture and Portland cement until creamy consistency is attained. Dampen surfaces and apply slurry using a notched trowel or stiff brush. CAUTION: While the slurry is still tacky, apply the mortar mixture as prepared below:
For use with mortar mixture, mix one (1) part of NovCrete Acrylic Mortar Admixture with one (1) parts clean water. Use this as gauging water to cement and sand. Subsequently, mortar application must be carried out while the bonding slurry is still tacky.
For HEAVY-DUTY STRENGTH mortar mixture, mix one (1) part NovCrete Acrylic Mortar Admixture with one (1) part clean water.
APPLICATION
1. Concrete surfaces must be cleaned thoroughly by removing all loosely adhering particles, dirt, oils,
paints, and other contaminants. Shake the contents very well prior to use.
2. For preparation of bonding slurry (mixture of adhesive and cement), mix equal parts of NovCrete
Acrylic Mortar Admixture and Portland cement until creamy consistency is attained. Dampen surfaces
and apply slurry using a notched trowel or stiff brush. CAUTION: While the slurry is still tacky, apply the mortar mixture as prepared in step #3.
3(a). For REGULAR STRENGTH mortar mixture, mix one (1) part of NovCrete Acrylic Mortar Admixture with two (2) parts clean water. Use this as gauging water to cement and sand. Subsequently, mortar application must be carried out while the bonding slurry is still tacky.3 (b). For HEAVY-DUTY STRENGTH
mortar mixture, mix one (1) part NovCrete Acrylic Mortar Admixture with one (1) part clean water.