• NovTek Quick Set

NovTek QUICK SET is a high performance polymer-modified tile adhesive that sets to light foot traffic in 3-4 hours or more depending on the type of application.

• Prevents tile cracks and bonding failure.
• High standing and adhesive tensile strength.
• Sets to light foot traffic in 3-4 hours.
• Easy workability and longer pot life.
• Lower labor cost and reduced installation time.
• For interior and exterior tie installations.

Intended Use

For ceramic tiles, natural stones, granite, marble, & mosaics.


Always store in a cool and dry area. NovTek QUICK SET Tile Adhesive has a shelf life of about (1) year.

Surface Preparation

Surfaces must be fully cured, clean, dry and free from contaminants.


• Pour 5-1/2 to 6 liters of clean water into a plastic pail and add one 25-kg bag of NovTek QUICK SET Tile Adhesive by gradual mixing.
• Always put water first in the container before adding the powder for proper preparation.
• Mix thoroughly until a trowelable consistency is attained. The mixture should be pasty and lump-free consistency.
• Let the mixture stand for 10-15 minutes while allowing to slake. Then stir again.

• Using a special notched trowel (6mm-12 mm) spread over 1-2 m2 at a time only.
• Lay down tiles and adjust accordingly. Use tile spacers to ensure the correct spacing of the tiles.
• Ensure that the spread adhesive is used in 25-30 minutes in maximum.
• Regularly check adhesive bed to ensure that no film layer has formed on the surface. If so disregard, mix and spread a new batch straight from the mixing pail.

Physical Properties

FORM             : Powder Form
COLOR          : Gray and white.
PACKAGING : 25 kg.
COVERAGE  : 5-7 m2

< Back